1. You are currently not signed in. If you are already a registered user Please log in to get the full benefit from this site. If not, why not register and gain full access to our wonderful forums, view topics, make posts, and more! So if your not already a user, you can register by simply clicking the button to the right of this notice.

My KTM refresh

Discussion in 'Main Forum' started by TunnerUK, Jan 21, 2013.

  1. TunnerUK

    TunnerUK Guest

    I bought my 04 950ADV in June 2012. 33k miles, decent accessories included, FSH (of sorts) but generally nice condition. On arrival the bike was as described although it was clear that it had seen a few winters. The ride from Newcastle to kent was faultless with the exception of one of the cheap Halfords spotlights shaking loose.
    As with when I buy any new bike, my plan was to give it a deep deep clean and a bit of a once over. I did a light trail ride during the following week which produced a flicking oil light ......... Time for a light resto I think!

    The engine bars although presentable were painted with rattle cans, the sump guard looked a little tired, black encrusted callipers, dull and grubby yolks and numerous corroded fixings ....... You get the picture!

    So .... I tore her down, sent a bunch of stuff off for re-plating, stripped and powder coated another bunch of stuff, ordered a bunch of parts and set to work.

    Fitted a CJ designs Water Pump kit inc bearings, Head race bearings, full fluids and filters, valve clearances checked, carbs balanced.

    Cleaned the absolute life out of everything, fitted new heated grips, ran a new accessory loom up from the battery to be switched from the ignition via a relay box for the grips, sat nav, autocom, spots etc .......

    Bolted her up and here she is!!

    Enjoy! (warning - Picture heavy)

    Before ....

    [​IMG]

    During ....

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    _Yappa_ and Finchy like this.
  2. TunnerUK

    TunnerUK Guest

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    I have since then fitted a super blingy KTM power parts chain + sprockets courtesy of a generous £100 discount offer from KTM :cash:


    [​IMG]

    And a bit of protective vinyl up the sides of the tanks so my MX boots don't rub the paint off!



    [​IMG]

    And apart from my new spot lights (in another thread) that's how she is right now!
     
  3. Blade rr6

    Blade rr6 World Superbike +

    Messages:
    759
    F?CK ME!!!!!! GOOD JOB:thumbsup:
     
  4. BlackHornet

    BlackHornet Look before you turn Staff Member Moderator +

    Messages:
    7,985
    :Dyou clean them i'l ride them:D

    not sure new bikes even leave the showroom as clean as this :thumbsup: Althou you need to stop using tap water as it leaves marks on the mirrors once dry, instead try water from victoria falls, although this must be taken from half way down and only on the 29th of feb every leap year to work :giggle:
     
  5. gixerpaulk5

    gixerpaulk5 Off Roader +

    Messages:
    181
    Very nice, great attention to detail
     
  6. lost

    lost Samsung leaflet fetishist +

    Messages:
    865
    :thumbsup: do you ever ride your bikes
     
  7. TunnerUK

    TunnerUK Guest

    Probably more than most fella;) I just look after em

    This was the 29th December ...........

    [​IMG]

    [​IMG]
     
    lost likes this.
  8. megawatt

    megawatt World Superbike +

    Messages:
    5,039
    I can see why you are mates with Finchy. Are you sure this is an off road bike and not a show bike?
     
    Finchy likes this.
  9. Finchy

    Finchy Guest

    Oooooh it must be something with us KTM owners - my bike's just started it's winter fettling (as you know). I thought that your sump guard was orange though?? Still, your Adv is a beauty! :)

    Here are a couple of pics before I take the panels / tank off (already removed the sump guard, battery box cover, wheels and various bits).
    [​IMG]
    I still can't dismantle the wheels ( so they can be fitted with stainless spokes... mmmmm) as the frikkin tool hasn't been delivered! Also, a few plastic panels are ready to go into the dishwasher :thumbsup:
    [​IMG]
    A few bits that are ready to go to the powder coaters (just the hubs go into the pile)
    [​IMG]
     
  10. megawatt

    megawatt World Superbike +

    Messages:
    5,039
    Have you done a pattern for the angle of the LED lamp brackets? ie where the weld is gonna be?
     
  11. kitten_art

    kitten_art Race Rep +

    Messages:
    1,768
    Who wants to come and clean Turmoil then? Thought I got my bike clean but sheesh!
     
    Roadwart and _Yappa_ like this.
  12. Finchy

    Finchy Guest

    Nope not yet. I'll try and do it on Thurs. I know what I want to achieve, but it's a case of finding the time to do it!
     
  13. kitten_art

    kitten_art Race Rep +

    Messages:
    1,768
    Not tonight Josephine! ;)
     
  14. Finchy

    Finchy Guest

    Kitten; there's no such thing as a free lunch. Chris - whaddya reckon? Two' s up? :rubhands:
     
  15. kitten_art

    kitten_art Race Rep +

    Messages:
    1,768
    Not asking for lunch ffs.........just clean my bike biatch! :giggle::giggle::giggle:
     
    Finchy likes this.
  16. Finchy

    Finchy Guest

    Oooooh handbags!
    [​IMG]
     
    kitten_art likes this.
  17. TunnerUK

    TunnerUK Guest

    You've seen the two photos of me riding it through a trench yes? :confused:
     
  18. megawatt

    megawatt World Superbike +

    Messages:
    5,039
    Friday better than Saturday Jay?;)
     
  19. Finchy

    Finchy Guest

    Right now, I dunno yet. I've got a busy coupla days ahead, so I'll let you know later in the week. TBH Friday would suit me better... if I can squeeze the time.
     
  20. megawatt

    megawatt World Superbike +

    Messages:
    5,039
    I gotta go to Welwyn on Saturday to pick up some engine parts for my racebike and attend the first Pendine Landspeed Records Club meeting. Only got about one hour , first thing?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice